Table of Contents
Advertisement
8
Figure 8
If the device is not displayed in the right hand list, please click the 'Rescan'
button. It will once again scan for Abtus devices that are turned on. The
communication uses 'Bluetooth' technology. Look for the 'Discovering...' message.
You must wait until this process is over and you see...
Look for your Abtus product in the device found right box list and click on it there.
Only paired devices will be listed in this box.
Click on the 'Connect' button.
If all is well, after a few seconds, the software will connect to the Routescan and
you get through to the previous screen and be ready to start work with the
Routescan.
If there is a problem with the connection - see the following 'Bluetooth
connection' section of this manual.
4650-60 Issue 01
Advertisement
Table of Contents
