Abtus ABT4650 RouteScan / AGI2 Instruction Manual page 8

7
Select your device by clicking on it from the right list box. And click on

'Connect'
Please be patient while the Control Unit makes the connection.

Once connected the screen shown in (Figure 7) will be displayed and you will
then be ready to start using the RouteScan.
If you go back to the Bluetooth Connect 'page' (Figure 8) you can double check
the device is connected on the orange box and a green indicator next to the
'trouble shooting' button means that your Bluetooth communication is established
properly.
Figure 6
Figure 7
4650-60 Issue 01