Slim tube HE sizes. hearing instrument. Slim tube HE is available in four different lengths to meet the needs of your patients� The red or blue numeric code on the slim tube identifies the ear Use the diagram below to identify some of the components of a slim tube HE to which it belongs (blue = left ear;...
Slim Tube HE for BTE-products. Measuring for an accurate slim tube HE length. Choosing the correct slim tube HE length will ensure a more accurate, comfor- table fit� The measurement tool included in the kit allows for a quick and simple measurement and has the following features: Color Code Markings –...
Page 6
Fitting guide. Slim Tube HE for BTE-products. To measure for an accurate slim tube HE length. Place your head at the same horizontal level as the patient’s head so Choose the sightline (0-1-2-3) on the measurement tool that is most you are looking straight into the patient’s ear that you wish to fit with...
Attaching and removing domes. Do an otoscopic examination of the patient’s ear canal� Based on the exami- To attach the dome, push the dome onto the slim tube HE until it touches the nation, choose an appropriate dome to fit the ear canal�...
Modifying the slim tube HE to improve fit. To attach the slim tube HE. In some cases, you might find that the slim tube HE does not lie close to the side of the head or follow the shape of the ear� First, ensure the selected dome and slim tube HE sizes are appropriate (see previous pages)�...
Note: If the retention piece is too long, you may cut the length slightly. Be careful not to shorten the Note: The slim tube HE and dome should never be rinsed or submerged in water as water drops may length too much, as it could affect retention in the ear.
Need help?
Do you have a question about the Slim Tube HE and is the answer not in the manual?
Questions and answers