2 CONFIGURATION
After importing the corresponding database in ETS and adding the device into the
topology of the desired project, the configuration process begins by entering the
parameters window of the device.
2.1 GENERAL
In "General" tab all the functionality of the device will be configured, being its main
function the sending of window/door state after each opening or closing.
In addition, two alarms will be available:
Tamper: notifies whether the device has been tampered with by removing its
enclosure.
Battery: warns the user when the battery level is about to run out.
ETS PARAMETERISATION
https://www.zennio.com
Figure 2. General screen
Technical Support:
WinDoor RF / WinDoor RF 915
https://support.zennio.com
7