Midea M thermal Mono Series Engineering Data page 77

M thermal Mono
-10
Notes:
1. It only has the curves of the high temperature setting for cooling, if the high temperature is set for cooling.
2. Curve 4 is default in high temperature cooling mode.
Figure 3-9.6: Automatic setting curve for heating mode
T1S (T1S2)
T1SETH1
T1SETH2
The setting of T1SETH1, T1SETH2, T4H1, T4H2 refer to Part 3, 8.6" HEATING MODE SETTING Menu" and T1SETC1, T1SETC2,
T4C1, T4C2 refer to Part 3, 8.5" COOLING MODE SETTING Menu".
76
Figure 3-9 : High temperature curves for cooling mode
.5
T1S(℃)
25
23
21
19
17
15
-5 0 5 10 15
T4H1 T4H2
Midea CAC Confidential
20 25 30 35 40
Figure 3-9.7: Automatic setting curve for cooling mode
T1S (T1S2)
T1SETC1
T1SETC2
T4
1
Curve 1
Curve 2
Curve 3
Curve 4
Curve 5
Curve 6
Curve 7
Curve 8
T4(℃)
45 50
T4C1
T4C2
T4
202005