Midea M thermal Mono Series Engineering Data page 34

9 Accessories
9.1 Standard accessories
Table 2-9.1: Standard accessories
Installation and owner's manual
Operation manual
Technical data manual
Y-shaped filter
Water outlet connection pipe assembly
Wired controller
Tighten belt for customer wiring use
Thermistor for domestic hot water tank or zone 2 water
1
flow
Extension wire for T5 or Tw2
Network matching wire
Adapter for inlet water pipe
Notes:
1. The thermistor can be used to detect temperature of water. If domestic hot water tank is installed only, the thermistor
can work as T5. If double zone function is used only, the thermistor can woke as Tw2. If both unit are installed, an
additional thermistor is needed (please contact the supplier).
2. When the units are connected in parallel, such as when the communication between the units is unstable (such as an Hd
fault code), add a network matching wire between the ports H1 and H2 at the terminal of the communication system.
9.2 Optional Accessories
Table 2-9.2: Standard accessories
Thermistor for the backup heater exchanger or AHS outlet
water temp.T1
Extension wire for Tw2 or T5
202005
Name
2
Name
Midea CAC Confidential
M thermal Mono
Quantity
MHC-V18W/D2RN8
Shape
MHC-V22W/D2RN8
MHC-V26W/D2RN8
MHC-V30W/D2RN8
1
1
1
1
2
1
2
1
1
1
1
Quantity
MHC-V18W/D2RN8
Shape
MHC-V22W/D2RN8
MHC-V26W/D2RN8
MHC-V30W/D2RN8
1
1
33