Operation Using Different Audio Sources; Bluetooth Connection - KBL beautyShaper Operating Instructions Manual

5.6 Operation using different
audio sources
The audio source can be changed via the control
panel.
The device can be operated using the following audio
sources:
INTERNAL MP3 PLAYER
When using the internal MP3 player, you can either
play the music tracks that are originally supplied on
the SD card, or you can record your own tracks to
the SD card.
EXTERNAL AUDIO SOURCES - LINE IN
As an external audio source, you can connect
devices ranging from the standard-line level to low
loudspeaker levels.
These sources comprise:
• Studio music
• External players such as MP3 players, I-pods, etc.
• External Bluetooth players
EXTERNAL 100 V AUDIO SIGNAL ON STUDIO
CHANNEL (OPTIONAL FEATURE)
If you decide for a connection to a 100 V audio
system, you will need a transformer (KBL no.: 9100
0170 00) for the transmission of the audio signal.
This connection must be made by qualified, trained
and authorized service technicians.
EXTERNAL PLAYERS
A line connection has been integrated into in the
head area near the interior control Panel so that
the user can connect his or her own player such
as an MP3 player, an iPod, etc. Use a stand-
ard 3.5mm jack cable (included if
option has been ordered). Connect the jack plug
to the earphone jack of your player. Then select
"MP3 ext." as the audio source from the inerior
control panel of the device before you start play-
ing your own tracks from the player. The tracks
20
O p e r a t i n g I n s t r u c t i o n s | KBL Tower beautyShaper
can only be selected via the user's own player.
The volume can be controlled via the control
panel of the device and also via the corresponding
operating elements provided by the user's player.

5.7 Bluetooth connection

To connect an external player (smartphone etc.) wire-
lessly to the device an optional Bluetooth interface is
available.
CONNECT EXTERNAL PLAYER
A Bluetooth connection can be established in
standby and during operating mode.
• Depending on your settings the search will be
performed automatically or manually. All available
Bluetooth devices within reach will be listed after
a short time.
• Among the available devices choose "KBL Sound".
the music
In the service menu, a trailing number (01, 02, 03,
...) can be added to devices name.
• If necessary confirm the shown code and connect
again. Not every smart phone asks for a code.
Make sure that you are within the recep-
tion area (about 2 meters).
Make sure that your player is configured
to search for other Bluetooth devices.
Should this not be the case, enable
Bluetooth manually. To do so, please
read the instructions for your player.