Page 1
INSTALLATION AND OPERATION INSTRUCTIONS FOR 30-TRV-SLIM 40-TRV-SLIM 50-TRV-SLIM 60-TRV-SLIM 72-TRV-SLIM SAFETY INFORM ATION WARNING If the information in these instructions are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. Do not store or use gasoline or ot her flammable vapors and liquids in t he vicinit y of t his or any ot her appliance.
Please read and carefully follow all instructions found in this manual. Please pay special attention to the safety instructions provided in this manual. The instructions included here will assure that you have many years of dependable and enjoyable service from your Amantii product. IMPORTANT INSTRUCTIONS ............................
IMPORTANT INSTRUCTIONS PLEASE RETAIN THIS USER GUIDE FOR FUTURE REFERENCE When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1) Read all instructions before using this fireplace 2) The fireplace is hot when in use.
UNPACKING AND TESTING APPLIANCE Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located 120 Volt grounded outlet. Test all aspects of its operation (manual switches, remote and heater) to make sure all components operate correctly.
30-TRV-SLIM This appliance has been tested in accordance wit h t he UL St andard 2021 Descript ion Built-in Appliance fixed locat ion dedicated Voltage 120V AC 60Hz elect ric room appliances in t he Unit ed Watt s 1500W M ax St ates and Canada.
40-TRV-SLIM This appliance has been tested in accordance wit h t he UL St andard 2021 Descript ion Built-in Appliance fixed locat ion dedicated Voltage 120V AC 60Hz elect ric room appliances in t he Unit ed Watt s 1500W M ax St ates and Canada.
50-TRV-SLIM This appliance has been tested in accordance wit h t he UL St andard 2021 Descript ion Built-in Appliance fixed locat ion dedicated Voltage 120V AC 60Hz elect ric room appliances in t he Unit ed Watt s 1500W M ax St ates and Canada.
60-TRV-SLIM This appliance has been tested in accordance wit h t he UL St andard 2021 Descript ion Built-in Appliance fixed locat ion dedicated Voltage 120V AC 60Hz elect ric room appliances in t he Unit ed Watt s 1500W M ax St ates and Canada.
72-TRV-SLIM This appliance has been tested in accordance wit h t he UL St andard 2021 Descript ion Built-in Appliance fixed locat ion dedicated Voltage 120V AC 60Hz elect ric room appliances in t he Unit ed Watt s 1500W M ax St ates and Canada.
SAFETY DRILL SCREW AREA There is a safet y drill screw area as show below. Please make sure t hat t he fix screws are in t his area. T h e m a n u a l c o n tro l p a d p o s itio n Sa fe ty d rill s cre w a re a (Da rk a re a ) HARD- W IRE INSTALLATION...
“ ” At t ach t he wiring t o t he junct ion block. Please make sure t he live wire goes int o t he , t he “ ” “ ” neut ral wire int o and t he ground wire int o Put t he plate back and screw back.
OUTDOOR INSTALLATION The TRV-SLIM series electric fireplaces are suitable for installation in outdoor areas protected from direct water impingement. In addition to maintaining the listed mantel and combustibles clearances, a rain protection overhang factor of 1/2 shall be constructed to the front and to each side of the installed appliance.
2. Take off the fending bars and panels if you " " " want to view the fire from three angles. 30-TRV-SLIM 33 3/4 11 1/ 8" 27 1/8 40-TRV-SLIM 43 3/4 11 1/ 8" 27 1/8...
Page 14
framing plat e framing plat e 5. Make an opening for the fireplace according to requested measurement. 7. After checking that the fireplace operates properly, cover the glass panels with protective plastic bag and install plywood or drywall. 6. Insert the fireplace into the wall opening. Drive the mounting screws into the frame plates on the unit and the wall studs.
Page 15
8. Decorate the plywood or drywall with glazed tile, wallpaper, etc. 3. After the fending panel is removed, screw back the bar. Installation for Front and right side Viewing 1. To install the fireplace where the left side is close to a wall, and you want to view the fire from front and right side, take off the fending panel on the right.
Page 16
5. Make an opening for the fireplace according 7. After checking that the fireplace operates to requested measurement. properly, cover the glass panels with protective plastic bag and install plywood or drywall. 6. Insert the fireplace into the wall opening. Drive the mounting screws into the frame plates on the unit and the wall studs.
Page 17
Installation for Front and Left Side Viewing 1. Install the fireplace where the right side is close to a wall, and you want to view the fire from front and left side, take off the fending panel on the left. 4.
Page 18
7. After checking that the fireplace operates properly, cover the glass panels with protective plastic bag and install plywood or drywall. 6. Insert the fireplace into the wall opening. Drive the mounting screws into the frame plates on the unit and the wall studs. To fix the bottom of the fireplace and the wall studs with the framing plates that you’ve removed from left and right side of the...
MEDIA OPTIONS The TRV-SLIM series models are shipped with DESIGN-MEDIA-BIRCH-10PCE. DESIGN-MEDIA-BIRCH-10PCE MEDIA OPERATION 3. Take off the front glass panel and put it in safe place. 1. Unscrew 2 screws and take off two brackets which are fending the front glass panel. S crews and brackets 4.
OPERATION The fireplace can be operat ed eit her by t he swit ches located on t he left bot t om of t he fireplace unit or by supplied remot e cont rol. Plug t he fireplace int o a 15 Amp wall socket . M ANUAL OPERATION The main power ON/ OFF swit ch in posit ion O, t he fireplace is OFF.
Page 21
REM OTE CONTROL OPERATION For remot e t o funct ion make sure t he heater is plugged in and main power swit ch locat ed on t he bott om left hand side is at posit ion I. When operat ing t he remot e make sure you point t he remote t o t he cent re of t he fireplace and make sure each t ime you press t he butt on.
INSTALLING WALL THERM OSTAT WALL THERM OSTAT W IRING DIAGRAM S W ire the wall thermostat prior to installing the fireplace. WALL THERM OSTAT W IRING(24 VAC) Install Wall Thermostat per instructions provided with kit and per the follow ing information: Turn off circuit breaker.
REPLACEM ENT PARTS This list contains replacement parts PART NUMBER DESCRIPTION 30-TRV-SLIM 40-TRV-SLIM 50-TRV-SLIM 10701384 10701281 10701216 Front Clear Glass 10201505 ADJUSTABLE SCREW FRONT CLEAR GLASS 3123010 BRACKET 10702266 10702267 10702268 BOTTOM TRAY GLASS 10702271 10701284B 10701219B BACK GLASS 10701385...
Page 24
This list contains replacement parts PART NUMBER DESCRIPTION 60-TRV-SLIM 72-TRV-SLIM 10701217 10701218 Front Clear Glass 10201505 ADJUSTABLE SCREW FRONT CLEAR GLASS 3123010 BRACKET 10702269 10702270 BOTTOM TRAY GLASS 10701220B 10701221B BACK GLASS 10701385 SIDE CLEAR GLASS 601136B 601137B LED STRIP FOR TRAY AND FLAME 601141B 601141B...
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE SOLUTION ’ ’ Dim or no flame Flame LED s are burnt out Inspect t he LED s and replace t hem if necessary. ’ ’ Ember Ember LED s are burnt out Inspect t he ember bed LED s and glowing or dimming replace t hem if necessary.
SERVICE HISTORY This heat er must be serviced annually depending on usage. Date Dealer Service technician Service Performed Special Concerns Name Name NOTES:...
Need help?
Do you have a question about the 30-TRV-SLIM and is the answer not in the manual?
Questions and answers