Husqvarna PG 690 Operator's Manual page 40

Error or warning
code
0x01070D
0x01070F
0x01070E
0x010740
0x010300
0x010301
0x010301 -
0x010376
0x010302
0x010307
0x01030F
0x010317
0x010318
0x010319
0x01034A
0x01034B
0x01034C
0x01035D
0x010400
0x010401 -
0x010474
0x010402
0x01040F
0x010407
0x01044B
0x020228
0x020424
0x020441
40
Message in the display
"Temperature measurement not working,
contact service!"
"Temperature in machine is too high!"
"Temperature in machine is too low!"
"Internal error, contact service!"
"Grinding disc driver error, contact service if
error persists!"
"Input voltage is too low!"
"Temperature in machine is too high!"
"Motor overload, contact service if problem
persists!"
"Grinding disc driver error, contact service if
error persists!"
"Temperature in machine is too high!"
"Motor overload, contact service if problem
persists!"
"Planetary head driver error, contact service
if error persists!"
"Input voltage is too low!"
"Temperature in machine is too high!"
"Remote control battery needs to be re-
placed!"
"Machine or remote control needs software
update, contact service!"
"The clock has stopped, please correct it if
necessary."
Cause
The product temperature can not be given.
Battery charge is not enabled.
Product temperature is high, product is stop-
ped.
Product temperature is low, product is stop-
ped.
No connection between variable frequency
drives and the grinding control unit.
General error.
Internal error in the variable frequency drive.
General error.
Internal error in the variable frequency drive.
The battery charge time is out.
No connection between the remote control
and the product.
The remote control clock does not show the
correct time.
1163 - 004 - 01.10.2020