Technical Data - Husqvarna PG 690 Operator's Manual

Technical data

Motor power, kW/hp
Rated current, A
Rated voltage, V
Phases
Frequency, Hz
Weight, kg/lbs
Grinding width, mm/in.
Grinding disc, mm/in.
Grinding pressure, kg/lbs
Grinding pressure with support
wheel, kg/lbs
Weight in position 1 (forward), kg/Ibs
Weight in position 1 (forward) with
support wheel, kg/Ibs
Weight in position 2 (vertical), kg/Ibs
Weight in position 2 (vertical) with
support wheel, kg/Ibs
Weight in position 3 (rearward),
kg/Ibs
Weight in position 3 (rearward) with
support wheel, kg/Ibs
Grinding disc speed, min/max rpm
Grinding head speed, min/max rpm
Direction of rotation
Max. gradient, degrees °
Enclosure, IP
Type of battery
Recommended dust extractor
1
Technical data for dust extractors are not conclusively describing actual performance over time between dif-
ferent dust extractors. For Husqvarna products OSHA objective data are available at
www.husqvarnacp.com/us.
1163 - 004 - 01.10.2020
Technical data
PG 690
3x380-415 V
12.5/17
30
380-415
3-phase
50-60
502/1107
630/24.8
3x270/10.5
228/503
265/584
292/644
329/725
227/500
264/582
185/408
221/487
441-1470
10-57
Independent direction of rotation CW/CCW for grinding discs and grinding
10
54
-
1
PG 690 RC PG 830
3x380-415 V 3x380-415 V
12.5/17 16.5/22
30
380-415 380-415
3-phase 3-phase
50-60 50-60
598/1318 556/1226
630/24.8 800/31.5
3x270/10.5 3x270/10.5
242/534 288/635
279/615 325/717
307/677 348/767
343/756 385/849
237/522 299/659
273/602 336/741
198/437 245/540
235/518 282/622
441-1470 421-1403
10-57
head.
10
54
Li-ion
PG 830 RC
3x380-415 V
16.5/22
30 30
380-415
3-phase
50-60
652/1437
800/31.5
3x270/10.5
302/666
339/747
362/798
399/880
313/690
350/772
259/571
296/653
421-1403
9-47 9-47
10 10
54 54
- Li-ion
45