Safety - Husqvarna PG 690 Operator's Manual

• the product is not repaired at an approved service
center or by an approved authority.
Husqvarna Fleet Services
Husqvarna Fleet Services
the operator an overview of all products that are
connected. This product has a Husqvarna Fleet
™
Services sensor with Bluetooth
The Husqvarna Fleet Services
data and lets you connect to the Husqvarna Fleet
™
Services system. The Husqvarna Fleet Services
system reports data such as operation time, servicing
intervals and location of the product. The BLE
technology operates at 2.400–2.4835 GHz.
For more information about Husqvarna Fleet Services
download the Husqvarna Fleet Services
to your Husqvarna representative.
®
Bluetooth Low Energy (BLE) module
On approved markets the product has a BLE module
that is connected with the Husqvarna Fleet Services
system. The BLE module collects and transmits product
data that is used in the Husqvarna Fleet Services
system. Data such as operation time, servicing intervals
and location of the product.
To setup embedded connectivity
1. Set up an account for the Husqvarna Fleet
™
Services system at the web site https://
fleetservices.husqvarna.com/signup.
2. Download the Husqvarna Fleet Services
mobile device.
3. Connect the product to a power source to put the
BLE module in operation.
4. Add the product to your account. Use the Husqvarna
™
Fleet Services app.
5. Obey the instructions in the Husqvarna Fleet
™
Services app.
Note: The Fleet enabled mobile device must be near the
product to connect.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
CAUTION: Used if there is a risk of damage
to the product, other materials or the
8
™
™
is a cloud solution that gives
®
Low Energy (BLE).
™
sensor collects product
™
app or speak
™
™
app on a
Note: The Bluetooth
first connection to the power source, and stays on after
that.
WARNING: High voltage. There are
unprotected parts in the power unit. Always
disconnect the power plug before you open
the door to the electrical box.
™
To put the product into flight mode
When the product is in flight mode, the BLE module
stops to transmit product data.
• Push the battery pack switch to the OFF position.
™
,
™

Safety

adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
General safety instructions
WARNING: Read the warning instructions
that follow before you use the product.
®
radio transmission enables on the
1163 - 004 - 01.10.2020