Single Timed Run - SKC Flite4 Operating Instructions Manual

To complete the manual sample run at the end of the
required sample time, on the Hold menu screen cycle to
the 'Reset' option and press
the 'SELECT' main menu screen.

2) Single Timed Run

Having previously programmed a single timed run without
delayed start and repeat runs, on the 'SELECT' main menu
screen cycle to the 'Run' option and press
pump. The elapsed runtime will be displayed counting up
in hours, minutes and seconds.
During a single timed run the same options as detailed for
a manual run are available by simultaneously pressing the
and keys to display the 'SELECT Hold' screen.
Note: The pump is still running at this point but whilst
the 'Hold' screen is displayed the elapsed runtime is NOT
incrementing.
At the end of the timed run the pump will automatically
stop and retain the elapsed runtime on the LCD screen.
www.skcltd.com
. The display will return to
to start the
007-01-014 Issue A
Operating the Flite4 Pump
Reset 002:00:03
Continue Flowset
SELECT
Æ
Run Setup Review
SELECT
Run Setup Review
Single Timed Run
Æ
000:00:07
+
SELECT
Hold Continue
End Of Timed Run
001:00:00
Sleep
Sleep
Æ
Page 23