Advertisement
FITTING GUIDE
L Corner Base Unit
Step 1.
Attach Fixing Plates (Ff) onto cabinets in 3 positions (1), (2), (3) as shown using 4 x
per plate. Be careful not to interfere with leg positions.
Sample cabinet shown
B
B
Page 1
For Internal Use: CON.INS.002.001_50-WKIN0008_BASE_LCnr_Rev4.indd
Screws for attaching to walls and worktop are not provided as these vary depending
on materials, thickness and construction. Ensure appropriate fixings for wall and
worktop construction are used. Please refer to the specialist worktop supplier if
Ff
Ff
View from rear of unit
Step 2.
Secure each of the legs into place with
2 x 5/8" screws (B). Ensure legs
are rotated as shown so that part of it
is supporting the end panel.
Step 3.
Use 2 x
of the L brackets (K) to the cabinet at
either side.
K
(H) x8 1
" Screws
1/4
(K) x5 L Bracket - Large
these are required for solid surface worktops.
(3)
"
screws (B) to secure each
5/8
(B) x82
" Screws
5/8
(Ff) x10 Fixing Plate
"
screws (B)
5/8
Ff
Ff
(1)
Ff
Ff
(2)
View from underside
B
REQUIRED TOOLS
Advertisement
Table of Contents
Related Manuals for Wren Kitchens L Corner Base Unit
Summary of Contents for Wren Kitchens L Corner Base Unit
- Page 1 FITTING GUIDE L Corner Base Unit (H) x8 1 ” Screws (B) x82 ” Screws (Ff) x10 Fixing Plate (K) x5 L Bracket - Large Screws for attaching to walls and worktop are not provided as these vary depending on materials, thickness and construction. Ensure appropriate fixings for wall and worktop construction are used.
- Page 2 ” Use 2 x Fixing Plates (Ff) with 4 x screws (B) to attach the corner post to the door frontal. L Corner Base Unit Sample cabinet shown View from rear of unit Step 5. The remaining two fixing plates (Ff) are to be used to attach the loose shelf sections together.
Need help?
Do you have a question about the L Corner Base Unit and is the answer not in the manual?
Questions and answers