Wireless Setup - D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to set up and configure the wireless settings on your camera.
Check this box to allow your camera to connect to your network
Enable
wirelessly.
Wireless:
Enter the network name (SSID) of the wireless network you want
SSID:
to connect to. You can also click the Site Survey button below
to choose an available network and fill in settings automatically.
If you are using Ad-Hoc as your connection mode, select the
Channel:
same channel that is being used by your wireless network.
Select the connection mode used by your wireless network. In
Connection
most cases, you should select Infrastructure. Ad-Hoc is only
Mode:
used if your camera is directly connecting to another PC or
device without the use of a router or access point.
Clicking this button will allow you to select an available wireless
Site Survey:
network to connect to, and will fill in the necessary settings for
you.
Select the wireless security mode used by your wireless network.
Wireless
If you select WEP or WPA-PSK/WPA2-PSK, enter the password
Security
for your wireless network in the text box that appears.
Mode:
D-Link DCS-5030L User Manual

Wireless Setup

32 32