Product Setup - D-Link DCS-7000L Quick Installation Manual

PRODUCT SETUP

ZERO CONFIGURATION SETUP
If you have a D-Link Cloud Router, you can take advantage of Zero Configuration Setup. This
feature automatically configures your camera's settings for you and adds it to your mydlink account
automatically. If you do not have a D-Link Cloud Router, you can use the Setup Wizard to install and
configure your camera, as described in the following section.
DCS-7000L
USING THE SETUP WIZARD
If you do not have a D-Link Cloud Router, you can simply use any Windows or Mac computer to
go through the Setup Wizard from the CD, which will guide you through the installation process from
connecting your hardware to configuring your camera.
If you do not have a CD-ROM drive, or the CD is missing, please download the Setup Wizard from
http://www.mydlink.com/support
DCS-7000L
Step 1:
Connect the power cable and an Ethernet cable to your Cloud
Camera.
Step 2:
Connect the other end of the Ethernet cable to your D-Link Cloud
Router and connect the camera's power adapter to a power outlet.
Step 3:
From any computer, open a web browser, go to
http://www.mydlink.com and log in to your account.
Click on the device name when the new device notification appears
to add the camera to your account.
If you wish to connect your camera to your router with a wireless
connection, you can simply disconnect the Ethernet cable and move
the camera to its intended location.
• Windows Users: Insert the CD. Simply click Set up your Cloud
Camera to go through the Setup Wizard. If the Setup Wizard
program does not automatically start on your computer, go to
Start > Run. In the run box type D:\autorun.exe (where D:
represents the drive letter of your CD-ROM drive) and click OK.
• Mac Users: Insert the CD. On the desktop, open your CD drive,
double-click on the SetupWizard file, wait about 20-30 seconds,
and follow the instructions.
3