D-Link DCS-5030L User Manual page 45

Section 3 - Configuration
Set the desired base file name for your snapshots.
Base File
Name:
Select how you want uploading of snapshots to be handled:
File:
• Overwrite will replace the old snapshot with the new
one. This means you will only have one snapshot that is
updated every time a new one is taken.
• Date/Time Suffix will add the date and time to the end
of the snapshot file name. You can also choose to make
subfolders based on a period of time you specify to help
you organize your snapshots.
• Sequence Number Suffix will add a number to the end
of the snapshot file name up to the number you specify,
after which the oldest files will be overwritten.
Clicking on the Test button will send a test JPEG snapshot to
Test FTP
the FTP server specified above to make sure that your settings
Server:
are correct.
Enabling this will allow video clips to be uploaded to your FTP
Enable the
server in various ways.
uploading of
video clips to
• Choosing Always will upload video continuously, based
an FTP server:
on the Video Limit specified below.
• Choosing Schedule will allow you to schedule when to
start and stop the uploading of video.
• Select Motion/Sound Detection if you would like the
camera to upload video only when motion or sound is
detected.
Set the desired base file name for your videos.
File Name
Prefix:
Specify the maximum file size and duration of the videos to be
Video Limit:
uploaded.
Clicking on the Test button will send a test JPEG snapshot to
Test FTP
the FTP server specified above to make sure that your settings
Server:
are correct.
D-Link DCS-5030L User Manual 45 45