PC. Note: Please do not connect the DSC-100 to your computer before installing the TWAIN driver for the first time. If you have already connected the DSC-100 to the computer, disconnect the DSC-100 from the USB port,...
Page 2
TWAIN Driver Installation Continued… Turn on your computer. Insert the DSC-100 Driver CD into the CD-ROM. The Autorun screen will appear automatically. Click on the button labeled “Install TWAIN Driver” Note: If the Autorun screen does not appear, click on Start and select Run.
Page 3
Install Batteries and Power On The DSC-100 receives power from the USB port when connected to the computer. When used as a digital camera, you must install batteries. Open the battery chamber cover. Insert 3xAAA batteries into the battery chamber and close the cover.
Page 4
If the Autorun program does not run, click on Start and select Run. In the run dialog box, type "drive:\setup.exe" where drive is the letter of your CD-ROM drive. Download Digital Photos Click on Start > Programs > DSC-100 > DSC-100 program.
Page 5
Download Digital Photos Continued… The following screen will be shown. This screen allows you to preview and select which images you would like to save as a file. Select the image(s) that you want to save and click the Get Pictures button.
Page 6
TWAIN interface. The DSC-100 as a Webcam This section describes how to use the DSC-100 using Microsoft’s Netmeeting software. Open Netmeeting by clicking on Start > Programs > Accessories > Communications >...
Page 7
§ The camera works best in well lighted situations. Caution: § Do not attempt to service this product. Contact D-Link Technical Support for instructions on servicing. § To reduce the risk of fire or electrical shock, do not expose this product to water or moisture.