Download  Print this page

Advertisement

1. Introduction
Thanks for purchasing the DSC-350 Dual Mode Camera. The User Guide
contains information about installing and using the DSC-350 and using the
TWAIN driver interface. This chapter introduces the basic functions of the
DSC-350.
Refer to further chapters for information on installing and using the
DSC-350.
Getting to Know the Digital Camera
The DSC-350 has all the features that you want in a digital camera and it's
easy to install and use. Before using or connecting any of the components,
please verify that all accessories are included.
The figures below show you the accessories names and positions.
Enclosed Accessories
1. DSC-350
2. TWAIN Driver in CD
3. 2xAAA Alkaline Battery
4. Camera Pouch
5. Hand Strap
6. Cradle
7. USB cable
8. Quick Start Guide
9. MGI Imaging software
10.User's manual
- 1 -

Advertisement

   Related Manuals for D-link DSC-350

   Summary of Contents for D-link DSC-350

  • Page 1 DSC-350. Getting to Know the Digital Camera The DSC-350 has all the features that you want in a digital camera and it’s easy to install and use. Before using or connecting any of the components, please verify that all accessories are included.
  • Page 2 Front View -Focus Ring -View finder -Lens -LED light -USB connector Rear View -LED light -View finder Top View -Delete/Remain button -Mode/Power button -Shutter release button - 2 -...
  • Page 3 Bottom View -Battery compartment -Cradle hole or Tripod hole Indications Inside the Status LCD display Status LCD Indicators 1.Single snap shot 2.Continuous snap shots (4 images) 3.Self timer 4.Video Recording 5.Frame rate 6.Photo number - 3 -...
  • Page 4 16.Batteries are fully charged 17. Batteries are drained 2. Installing the DSC-350 System Requirements To take advantage of the full-functionality of the DSC-350, your computer must meet or exceed the system requirements listed below: IBM-PC/AT or compatible with USB port - 4 -...
  • Page 5 (3) There are two ways to install the TWAIN & Device Drivers. A. Autorun Program You will see the drawing below while you insert the DSC-350 Driver CD into the CD-ROM. Just choose the suitable OS for your computer. - 5 -...
  • Page 6 Type “drive:\win2000\setup” if you are running Windows 2000. Replace drive with the letter of your CD-ROM. Note: The first time you connect the DSC-350 to your computer while the computer is on, Windows will ask you for the Driver CD and the Windows Installation CD.
  • Page 7 CD-ROM letter). Connecting the Dual Mode Camera to a Computer You can use the DSC-350 as a PC camera or retrieve/edit images stored in the built-in flash memory as a digital still camera. To connect the camera to your computer: 1.Power the DSC-350 off.
  • Page 8 and then press “MODE/Power” button to set the shooting modes. There are 5 shooting modes. 1.Single snap shot mode ( picture every time you press the shutter release button. 2.Single snap shot with Self Timer mode ( camera will take one picture 10 seconds after you press the shutter release button.
  • Page 9 (DSC-350 Digital Camera and Video Camera) When taking still images or video recording: MAKE SURE THE DSC-350 is POWERED ON and SET AT THE MODE YOU NEED. Make sure you are able to locate the object you want to shoot through the view-finder.
  • Page 10 1 second to save the image. When the green LED light stops blinking and the ”BUSY” indicator disappear in the status LCD, the image saving is done and the DSC-350 ready for next shot. Note: The focus range is from approximately 1.5 inch (4cm ) to infinity.
  • Page 11 (focus range from 60 inch ~ infinity ). 3. PC camera function (9) Power off your DSC-350. (10) Connect your DSC-350 to you PC. The DSC-350 camera will automatically power on and switch to PC camera function. (11) Choose MGI Imaging Software.
  • Page 12 Getting to Know the TWAIN Interface The DSC-350 ship with a user-friendly software for the TWAIN interface. You can use the software that comes bundled with the DSC-350 to download the pictures that you take with the DSC-350 TWAIN is an industry standard interface for scanners and digital cameras.
  • Page 13 3. Choose D-Link DSC-350 Note: You need to select the Source just one time ( Step 2 and Step 3) after you install the TWAIN Driver. 4. Acquire: Push “Download” button. 4.1 Retrieving thumbnail - 13 -...
  • Page 14 4.2 Thumbnail: After acquire, you will get the thumbnails of your pictures. 5. If a Can NOT find your Digital Still Camera error appears: Please check your USB connection and push the OK and Preview buttons to try again. 6. GET Pictures: Please select the picture you want, and then click - 14 -...
  • Page 15 “get pictures”. 6.1 Open pictures If you want to view the full-size picture before saving it to disk, select the “Open Pictures” 6.2 After you press the OK button, the full size picture will be retrieved and the thumbnail window will be closed. 6.3 Save to disk [Do not open] - 15 -...
  • Page 16 If you want to save the pictures to disk directly please select the “Save to Disk [Do not open]”. You can select your favorite directory to save the pictures, just pushing the browse button “…”. The prefix will become the first part of the pictures’ file names. For example, if you select pictures 0001, 0003 and 0010 to save to disk, and the prefix is “Pic”.
  • Page 17 be saved as Pic0001-1.jpg, automatically. In video file format, You can choose AVI or Mpeg1 file format. AVI file has large file size but short image processing time. Mpeg1 file has small file size but long image processing time. 7. Erasing pictures: Select the pictures you want to erase and click on the “ERASE”...
  • Page 18 Push the “Snapshot” button, and you can take a picture on line 9. Memory Check: Push Press the “Memory Check” button to check the memory in your DSC-350. Warning: Memory check will destroy all photos. Memory Check ” will take a while. When it is processing, please DO NOT abort it.
  • Page 19 After Memory Check: 10. Congratulations! Now you can manage, enhance and edit your photographs as you want. 5. DSC-350 Camera Specifications - 19 -...
  • Page 20 DSC-350 Camera Image devices Resolution Color depth Auto exposure Cxposure/lris Control-iso rating White balance Shutter speed view finder Status lcd Self timer Lens Focus Range Aperture Consecutive shots Format Recording Media Delete Picture PC Camera Max. frame/sec VIDEO Recording Recording Time...

Comments to this Manuals

Symbols: 0
Latest comments: