Ftp - D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to configure your camera to send snapshots and video clips to an FTP server.
Enter the IP address of the FTP server that you will be connecting
Host Name:
to.
Enter the port of the FTP server that you will be connecting to.
Port:
Enter the user name of your FTP server account.
User Name:
Enter the password of your FTP server account.
Password:
Enter the destination path/folder to save files to on the FTP
Path:
server.
Enabling passive mode may help you reach your FTP server if
Passive Mode:
your camera is behind a router protected by a firewall.
Enabling this will allow snapshots to be uploaded in different
Enable the
ways:
uploading of
images to an
• Choosing Always will upload snapshots continuously
FTP server:
based on the Image Frequency specified.
• Choosing Schedule will allow you to schedule when to
start and stop the uploading of snapshots.
• Select Motion/Sound Detection if you would like the
camera to upload images only when motion is detected.
Set how frequently you want images to be taken and uploaded.
Image
You can choose to upload by frames per second, or by seconds
Frequency:
per frame.
D-Link DCS-5030L User Manual

FTP

44 44