Video - D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to configure the video settings for your camera.
This section allows you to change the Resolution, FPS, and
Video Profile:
Quality.
Your camera has separate settings for the H.264 and MJPEG
Encode Type:
video streams.
Select the desired video resolution from three formats: 1280 x
Resolution:
720, 640 x 480, , and 320 x 240. Higher settings offer better
quality, but will require more bandwidth to stream.
Select the desired bit rate for the video. A higher bit rate will
Bit Rate
increase image quality, but will require more bandwidth to
stream.
Select the frame rate (FPS) to use for the video stream. Higher
Frame Rate:
settings offer better quality, but will require more bandwidth
to stream.
Select one of five levels of image quality: Very High, High,
JPEG Quality:
Medium, Low, and Very Low.
Select the default encoding to use when viewing your video
Default View
on the Live Video page.
Mode:
Select the frequency used by your lighting and power to help
Light
reduce image flicker.
Frequency:
D-Link DCS-5030L User Manual

Video

37 37