Day/Night Mode - D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to configure when Day and Night modes are used. Day mode uses the infrared cut filter to provide a
corrected color image for times where there is available lighting. Night mode moves the filter out of the way to use all available
light, and turns on the IR LED illuminators to allow for clear black and white video in dark areas with little or no light.
This mode will automatically switch between Day and Night
Auto:
mode based on the amount of available lighting.
This mode allows you to manually switch between modes
Manual:
through the Live Video page.
This sets the camera to always use Day mode.
Always Day
Mode:
This sets the camera to always use Night mode.
Always Night
Mode:
This sets the camera to use Day mode during the times you
Day Mode
specify, and will switch to Night mode outside the times you
Schedule:
specify.
D-Link DCS-5030L User Manual

Day/Night Mode

47 47