FlameSpec Flame Simulator Manual Doc. No. F300V0020.01 Safety Warnings: • Do not try to open, modify or repair the Flame Simulator. • Inspection and maintenance of this equipment should be performed by suitable trained personnel, in accordance with the applicable code of practice, e.g. EN 60079-17.
Maintenance costs are therefore reduced. FlameSpec Flame Simulators emit either IR or UV - IR radiation (according to the model) in a special electromagnetic radiation pattern which simulates a fire to the detectors.
FlameSpec Flame Simulator Manual Doc. No. F300V0020.01 2 Operation 2.1 Flame simulator activation Warnings: • Testing using a flame simulator to simulate a fire to the detector may activate alarms or extinguishing systems in the area unless disabled/inhibited/bypassed. • All tests should be coordinated, and if needed, disconnect/disable the alarm and/or the extinguishing systems before the test, and reconnect after the test.
FlameSpec Flame Simulator Manual Doc. No. F300V0020.01 Note: factory default settings for Detectors sensitivity is Medium Simulator Kit FLS-FSIM-IR3-KIT FLS-FSIM-IR3-H2-KIT FLS-FSIM-UV-IR-KIT FLS-IR3-HD FLS-IR3-H2-HD FLS-UV-IR-HD Use with Detector Model FLS-IR3 FLS-IR3-H2 FLS-UV-IR ft. (m) ft. (m) ft. (m) 23.0 (7.0) 23.0 (7.0) 21.3 (6.5)
FlameSpec Flame Simulator Manual Doc. No. F300V0020.01 4 Servicing/Maintenance Warnings: • Do not try to open, modify or repair the Flame Simulator. • Repair, inspection or maintenance of this equipment should be performed by suitable trained personnel, in accordance with the applicable code of practice, e.g.
FlameSpec Flame Simulator Manual Doc. No. F300V0020.01 6. Connect supplied charger to charging jack (8) and connect charger to power supply, 110-220VAC. 7. Allow to charge for at least 3 hours. 8. Disconnect charger, close back-battery cover (2) and tighten using the removal tool.
FlameSpec Flame Simulator Manual Doc. No. F300V0020.01 5.5 Physical Dimensions. 2 - D IGURE IMENSIONS IN MM For more information & technical support: (+1) 714-671-8500 · support@fg-detection.com...
FIRE & GAS DETECTION TECHNOLOGIES INC. agrees to extend to Purchaser/Distributor a warranty on the FIRE & GAS DETECTION TECHNOLOGIES INC. supplied components of the FlameSpec products. FIRE & GAS DETECTION TECHNOLOGIES INC. warrants to Purchaser/Distributor that the products are free from defects in materials and workmanship for a period of three (3) years, commencing with the date of delivery to Purchaser/Distributor.