Table of Contents
Advertisement
FlameSpec Flame Simulator Manual
6. Connect supplied charger to charging jack (8) and connect charger to power supply,
110-220VAC.
7. Allow to charge for at least 3 hours.
8. Disconnect charger, close back-battery cover (2) and tighten using the removal tool.
9. Close the locking screw using the Allen key.
5 Specifications
5.1 Mechanical
Size
Weight
Enclosure
Ingress protection
5.2 Electrical
Power
Maximum current
Battery capacity
Charging time
5.3 Environmental.
Temperature
Storage:
Operation:
Humidity:
5.4 Approvals
ATEX:
Ex II 2 G D
Ex db ib op is IIC T6 Gb
Ex tb ib op is IIIC T85°C Db
-20°C to +50°C / -4°F to +122°F
For more information & technical support: (+1) 714-671-8500 · support@fg-detection.com
Doc. No. F300V0020.01
3.9 x 3.9 x 7.8 inch (100 x 100 x 200mm)
3.96lbs. (1.8Kg)
Painted Aluminum LM25
IP65 (NEMA 4X)
Li-ion 3.7V
0.5A (IR models) / 0.7A (UV-IR model)
> 3000mAh
3 Hours
-4°F (-20°C) to +122°F (+50°C)
-4°F (-20°C) to +122°F (+50°C)
up to 99%, non-condensing
5
Advertisement
Table of Contents
