Download Print this page
Hioki PW3365-20 Quick Start Manual

Hioki PW3365-20 Quick Start Manual

Clamp on power logger power meter
Hide thumbs Also See for PW3365-20:

Advertisement

Quick Links

PW3365-20
CLAMP ON POWER LOGGER
Power Meter
Eliminate the risk of
short-circuits and electrical accidents
he orld s rst instrument to offer
no-metal-contact power measurement
Free from the risk of short-circuit accidents since no
metal comes into contact with energized parts, the
Clamp On Power Logger PW3365-20 can measure
voltage, current, and power right on the cable, letting
you safely test in locations that were dangerous or
even impossible in the past.

Advertisement

loading
Need help?

Need help?

Do you have a question about the PW3365-20 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hioki PW3365-20

  • Page 1 Free from the risk of short-circuit accidents since no metal comes into contact with energized parts, the Clamp On Power Logger PW3365-20 can measure voltage, current, and power right on the cable, letting you safely test in locations that were dangerous or...
  • Page 2 Safe, Easy, Voltage Measurement The PW3365-20’s dedicated voltage sensor delivers the world’s first no-metal-contact measurement. Free yourself from the risk of short-circuits by measuring right on the cable sheath without ever needing to touch metal to energized parts Freely clip either...
  • Page 3 *2: For frequencies of 45 Hz to 66 Hz. humidity Effects of humidity: Add the following to the combined accuracy - 0°C 60°C °F to 22°F , (for voltage, power, and phase) with the PW3365-20 Storage temperature Accuracy within ±1% f.s., phase within ±1°, less no condensation humidity...
  • Page 4: Setup Flow

    Setup Flow (example: 3P4W) STEP1 Quick Set START / Choose the wire type STEP2 Connect the leads to the PW3365-20 STEP3 Connect the voltage sensor STEP4 Connect the clamp sensors Miswiring Example (Clamp Orientation)
  • Page 5 Review Results Display measured values as a graph At the and evaluate results at a glance Worksite Measured values can be displayed as a graph, which is convenient when using the instrument in power management applications. Since you can statistically review not only the measured value at that moment, but also measured values that have been recorded, it’s easy to check values on the spot.
  • Page 6: Loading Data

    Download the measurement results to a computer via the power logger's LAN or USB interface or its SD card. Once data has been downloaded, it can be graphed easily with free software. For more detailed analysis, Hioki’s optional SF1001 application software is recommended. Storage media for data...
  • Page 7 Convenient Functions For the More Uses for the PW3365-20 Worksite The Hioki PW3365-20 is not just a power logger. Added-value features and functions let you meet many other electrical testing applications. Leakage Current Measurement Requires optional clamp-on leak sensor Measure power + 1-channel of leakage current...
  • Page 8 Total display range: Within 0 to 130% of the range (“0W” display indicates zero rms voltage and/or current) Power ranges Effective measurement area: Within 5 to 130% of the range Voltage : ±1.5% rdg. ±0.2% f.s. (combined accuracy with PW3365-20 + PW9020) Measurement accuracy Current : ±0.3% rdg. ±0.1% f.s. + clamp sensor accuracy (50/60Hz) Active power : ±2.0% rdg.
  • Page 9 Current input section: Depends on clamp sensor in use. 1/2/5/10/15/30 seconds, 1/2/5/10/15/20/30/60 minutes Save interval time Available storage time is displayed on the PW3365-20's setting screen Dielectric strength 7.06 kVrms AC Measurement save : Average only/average, maximum, minimum...
  • Page 10: Current Clamp

    Dimensions / Mass Not used for power measurements Not used for power measurements LR06 alkaline battery × 2 or *Maximum AC measurement range with Maximum AC measurement range with Power supply Notes AC ADAPTER 9445-02/9445-03 (optional) PW3365-20 is 5A PW3365-20 is 5A...
  • Page 11 Measurement Range Con gurations Combined Accuracy PW3365-20 + PW9020 + clamp sensors Range CLAMP ON SENSOR 9694 / 9695-02 9694 9695-02 ±2.3% rdg. ±0.32% f.s. 50.000A Current Voltage Connection ±2.3% rdg. ±0.4% f.s. 10.000A 500.00mA 1.0000A 5.0000A 10.000A 50.000A ±2.3% rdg. ±0.32% f.s.
  • Page 12 USB cable (1) Spiral tubes (10) Clamp On Power Logger PW3365-20 by itself does not support current and power measurements. Current and power measurements require clamp on sensors, sold separately. Use only HIOKI SD cards guaranteed to work for saving measurement data (options, sold separately).