Instructions To Replace Evaporator Fan Motor - Hoshizaki RM-45-SD Service Manual

DISCONNECT UNIT FROM POWER SUPPLY BEFORE DOING ANY SERVICE
Fan Guard
1. Unscrew the four screws that hold in
place the fan guard on the air baffle
using a Phillips screwdriver # 2.
Instructions to Replace the Evaporator Fan Motor.
2. Remove the bolt that hold in place
the fan blade to the fan motor
using a 9/32" socket screwdriver.
3. Unscrew the four screws that hold in
place the support base motor to the
top of cabinet using a Phillips
screwdriver # 2.