Advertisement
DISCONNECT UNIT FROM POWER SUPPLY BEFORE DOING ANY SERVICE
Instruction to Replace Starting Relay, Overload Protector and Starting Capacitor.
12. Remove the four bolts that
hold in place the electrical
box using a ¼" socket
screwdriver.
13. Insert a flat screwdriver in
the slot of the plastic
electrical box to remove
it from the compressor.
Use the flat screwdriver
as a pry bar to push the
box downward.
14. To remove the overload
protector use a slotted
screwdriver as a pry bar to
pull out it from the
compressor shell.
15. To install the new overload
protector reverse the
previous steps
Advertisement
