Use - Qilive Q.6326 User Manual

4.4.2. DRAIN HOSE
Warning!
■ Do not bend or stretch the drain hose.
■ Position the drain hose properly, otherwise damage may be caused due to water
leakage.
There are two ways to position the end of the drain hose:
1. Place it directly into the water trough. 2.
Water
trough
Note!
■ If the machine has drain hose support, install the drain hose as follows:
Warning!
■ When installing the drain hose, fix it properly with a hose tie.
■ If the drain hose is too long, do not force it into the washing machine, as this will
result in abnormal noises.

5. USE

5.1. QUICK START
Caution!
■ Before washing, make sure the washing machine is properly installed.
■ Before washing for the first time, the washing machine should be run for a full
cycle without clothes as follows.
Calibration
It is recommended to calibrate the washing machine before first use.
1. Empty the washing machine.
2. Plug in the washing machine.
Connect it to the branch drain pipe of
the trough.
Trough
Hose
Retainer
19
EN