Table of Contents
Advertisement
1. Insert foam seal behind the top of the lower window sash and
against the glass of the upper window.
A
A. T op of lower window sash
.
B Foam seal
2. Use a
1 /8"
(3mm)
drill bit to drill a starter hole through the
hole in the top rail.
3. Attach top channel to window sash with one
screw to secure window in place.
c
C.Sealing sponge
4.
C heck the gap around the unit and seal it with the adhesive
seal attached.
Operating your air conditioner properly helps you to obtain the
best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
If you turn off the air conditioner, wait at least
■
before turning it back on. This prevents the air conditioner
from blowing a fuse or tripping a circuit breaker.
Complete Installation
B
(19mm)
3/4"
check the gap
AIR CONDITIONER USE
3
minutes
Electrical Shock Hazard
Plug into a grounded
Do not remove ground prong .
Do not use an adapter .
Do not use an extension cord .
Failure to follow these instructions can result in death ,
,
fire or electrical shock
Plug into a grounded 3 prong outlet.
5.
Press RESET on the power supply cord. See "Electrical
6.
Requirements".
A
ir conditioner in the Cool mode
■
Outdoor side 64.4~109.4°F (18~43 °C), 80%RH; indoor side
62.6~89.6°F (17~32°C), 80%RH.
8
WARNING
3
.
prong outlet
.
operation the better limits:
Advertisement
Table of Contents
