Table of Contents
Advertisement
Caution
The NMC module uses lasers. The lasers are compliant with the requirements for a Class 1
laser product and are inherently eye safe in normal operation. However, you should never look
directly at any visible laser when the module is operational.
To install an NMC:
1
If the integrated services platform is running, perform a shutdown.
2 Wait until the LCD panel is no longer illuminated to confirm that the integrated services platform has
successfully shut down.
3 Disconnect all power cords from the integrated services platform.
4 Unlock the mounting latch on the blank NMC unit or functional NMC and pull the lever to remove.
Caution
Ensure that the connectors on the back of the NMC do not come into contact with your
hands or the packing material as you unpack the NMC. Avoid damaging the connectors as
you insert the NMC into the integrated services platform.
5 Remove the new NMC from the packing.
6 Carefully align and insert the NMC into the NX-7500.
7 Press the locking latch to lock the NMC in place.
8 Reconnect all power cords to the integrated services platform.
9 Apply power to the integrated services platform.
10 Verify that the integrated services platform LCD panel is illuminated.
11 Login in to the Management Interface and verify that the replacement NMC is operational.
NX-7500 Series Integrated Services Platform SFP Installation
The NX-7500 series integrated services platform supports use of SFP transceivers.
Note
SPF transceivers are keyed so that they can only be installed with the correct orientation.
To install a SFP transceiver:
NX-7500 Series Integrated Services Platform
Hardware Installation
14
Advertisement
Table of Contents
