Warnings; Cautionary Statements - Extreme Networks ExtremeWireless NX-7500 Series Installation Manual

Part Number
NX-7510-100R0-WR
NX-7520-100R0-WR
NX-7530-100R0-WR

Warnings

•
Read all installation instructions and site survey reports, and verify correct equipment installation
before connecting the appliance to its power source.
•
Remove jewelry and watches before installing this equipment.
•
Verify the unit is grounded before connecting it to the power source.
•
Verify any device connected to this unit is properly wired and grounded.
•
Connect all power cords to a properly wired and grounded electrical circuit.
•
Verify the electrical circuits have appropriate overload protection.
•
Attach only approved power cords to the device.
•
Verify the power connector and socket are accessible at all times during the operation of the
equipment.
•
Do not install this equipment or work with its power circuits during thunderstorms or other weather
conditions that could cause a power surge.
•
Verify there is adequate ventilation around the device, and ambient temperatures meet equipment
operation specifications.

Cautionary Statements

Caution
There are no user-serviceable components inside the NX-7500 series integrated services
platform. Opening the chassis will void the warranty.
Caution
BIOS settings on the NX-7500 series integrated services platform should not be changed.
Changing any settings in the BIOS will void the warranty on the integrated services platform.
Caution
To prevent the integrated services platformfrom overheating, never install in an enclosed area
not properly ventilated or cooled. For proper airflow, keep the front and back sides of the
integrated services platform clear of obstructions and away from the exhaust of other
equipment.
NX-7500 Series Integrated Services Platform
Description
NX-7510 base server appliance with single AC power
supply
NX-7520 base server appliance with dual DC power
supply
NX-7530 single AC power supply server appliance with
RAID
Hardware Installation
10