Advertisement
Available languages
Available languages
INSTALLATION
It is important that the installation instructions below are carefully followed to successfully install
this portable air conditioner. If you have any difficulties or questions regarding these installation
procedures, please contact customer service.
Before installation:
1. Find an area near an electrical outlet.
2. Install the exhaust pipe as shown in the images below (Fig.6 and Fig. 6a)
3. Insert the cable into an AC220~240V/50Hz grounded outlet.
4. Press
the
Fig.6
Check that the exhaust pipe is installed correctly.
Precautions to be taken:
- When using the cooling and dehumidifying functions, keep an interval of at
least 3 minutes between each function.
- The plug is well adapted for use with this air conditioner.
- Do not connect several devices to the same outlet.
- Power supply: AC220-240V, 50HZ
1.Power – On/Off switch
2. Mode – Mode selector
3. Timer – Hourly programming
4. Speed – Fan speed selector
5.Temp+ - Temperature selector up
6. Temp- - Temperature selector down
'On/Off'
button
to
turn
on
the
Fig.6a
air
conditioner.
Advertisement
