Table of Contents
Advertisement
13 Commissioning
13 Commissioning
Corrosive chemicals!
▶ Risk of caustic burns.
Wear suitable protective gear.
●
Completely drain the plant.
●
Leakage
▶ Emission of dangerous materials.
Provide precautionary measures against exceeding the
●
maximum permitted pressures caused by pressure
surges (water hammer).
Use as end-of-line valve!
▶ Damage to the GEMÜ product.
When using the GEMÜ product as an
●
end-of-line valve, a mating flange must
be fitted.
Cleaning agent
▶ Damage to the GEMÜ product.
The plant operator is responsible for selecting the clean-
●
ing material and performing the procedure.
1. Check the tightness and the function of the product (close
and reopen the product).
2. Flush the piping system of new plant and following repair
work (the product must be fully open).
ð Harmful foreign matter has been removed.
ð The product is ready for use.
3. Commission the product.
4. Commissioning of actuators in accordance with the en-
closed instructions.
14 Operation
Operate the product according to the control function (see
also chapter "Pneumatic connections").
GEMÜ R481
WARNING
CAUTION
CAUTION
CAUTION
30 / 41
www.gemu-group.com
Advertisement
Table of Contents
