Input/Output Module (Digital, 16) Pcio2002-A1; Mounting; Installation; Configuration With The Id-Switch - Siemens Novigo Core Installation, Mounting

6.5 Input/output module (digital, 16) PCIO2002-A1

6.5.1 Mounting

6.5.2 Installation

6.5.3 Configuration with the ID-Switch

A6V11940317_en--_a
The 'PACE-Bus' module 'Input/output module (digital, 16)' PCIO2002-A1 provides:
●
8 galvanically isolated 2-pole relay outputs with changeover switches
●
16 logic control inputs
●
8 analog control inputs
It can be extended with one slave module 'Output extension (relay, 8)' PCO2003-
A1 with 8 additional 2-pole relay outputs.
The 'PACE-Bus' module 'Input/output module (digital, 16)' PCIO2002-A1 is
designed to be mounted on a DIN rail in the cabinet.

Fig. 47: PCIO2002-A1 connector overview

The connector 'J2' is used to connect an 'Output extension (relay, 8)' PCO2003-A1
module with 8 additional 2-pole relay outputs.
The ID-Switch must be set to the correct values to identify the components on the
'PACE-Bus' (RS485). The ID must be unique on one 'PACE-Bus' (RS485).
The ID switch 1 and 2 are used to set the RS485 address. The ID-switch 3 to 8 are
reserved for future application and should stay in the OFF position.
1 2 ID
0 0 10
1 0 11
0 1 12
1 1 13

Table 55: PCIO2002-A1 set the RS485 address with ID switches

●
0 = OFF
●
1 = ON
Install internal components
Input/output module (digital, 16) PCIO2002-A1
6
83 | 121