Toto WASHLET SW3084T40 Instruction Manual page 8

Preparation
1. Insert the battery
1
Remove the remote control
from the hanger.
Remote control
Hanger
2
Open the battery cover and
insert two AA batteries.
Close
Open
Battery cover
 When batteries are properly loaded, all
the LEDs on the remote controll light up
for about 2 sec.
3
Mount the remote control in the
hanger.
■ About the batteries
 Use dry cell, alkaline batteries.
 Be sure to follow "Safety Precautions" to
prevent the batteries from rupturing or leaking
fl uid. (Pages 6, 8)
14
Using the Product for the First Time
If the remote control is secured
(for anti theft)
1
Remove the screw from the
remote control fi xture.
(View from side)
Remote control
Hanger
Screw
Remove
Phillips screwdriver
2
Remove the remote control
from the hanger.
■ To secure the remote control again
Tighten and fi x the screw.
(Overtightening may cause damage to parts
such as the hanger.)
2. Turn on the power
1
Insert the power plug.
 The wand extends and then retracts.
2
Check that the "Power" LED
lights up.
Wall
<Power>
<If the light is off >
 Switch "Power" to "ON" using the remote control.
To operate from the back of remote control
Press "Power ON/OFF" button about 3 seconds
or longer.
To operate from the front of remote control
 Recommended if the remote control is secured to
prevent theft, etc.
Press "Oscillating cleansing" button about
10 seconds or longer.
3. Open the shutoff valve
1
Fully open the shutoff valve.
Shutoff
valve
15