Toto WASHLET SW3084T40 Instruction Manual page 11

Temperature Adjustment
Three diff erent temperature levels (High, Medium, Low) and "OFF" setting can be made.
Displaying the
temperature level of
the pressed button
Toilet seat Drying air
temperature temperature button
(When you want to
button (When you
adjust the drying air
want to adjust
temperature)
the toilet seat
temperature)
Warm water
temperature button
(When you want
to adjust the warm
water temperature)
Adjusting the temperature
1
Remove the remote control from the hanger.
• If the remote control is secured to prevent theft (Page 14)
2
Choose and press the button of the temperature that you want to set
from the ("Toilet seat temperature"button),
temperature" button) and
• The current temperature level appears.
3
Press the button selected in step
temperature level lights up.
The setting changes each time the button is pressed once
"OFF" "Low"
OFF Lit
• The "Drying" cannot be turned "OFF".
If the button is not pressed for about 10 seconds, the "Temperature adjustment" LED will go off , but the setting will be retained.
If the "Temperature adjustment" LED goes out before the setting is completed, start all over again at step 2.
<Settings complete>
4
Mount the remote control in the hanger.
• If the remote control is secured to prevent theft (Page 14)
 When the toilet seat does not get warm, or when the warm water is not warm enough, even after
temperature adjustment.
 Is the "Energy saver" set to "ON"? (Page 22, 23)
20
Toilet Seat, Warm Water, Drying
When the seat
temperature and the warm
water temperature are set
Lit
<Seat> <Water>
("Warm water
("Drying air temperature" button).
2
repeatedly until a desired
"Medium" "High"
Lit
Lit
To turn the warm water temperature and toilet seat temperature "OFF"
The "Drying" cannot be turned "OFF".
1
Remove the remote control from the hanger.
• If the remote control is secured to prevent theft (Page 14)
2
Select a temperature button you want to turn "OFF" from
temperature" button), ("Warm water temperature" button) and press it.
• The current temperature level appears.
3
Press the button selected in step
is set to "OFF".
The setting changes each time the button is pressed once
"Low"
"OFF"
Lit
OFF
(All LED's)
<Settings complete>
4
Mount the remote control in the hanger.
• If the remote control is secured to prevent theft (Page 14)
When the seat
temperature and the warm
water temperature are
turned "OFF"
OFF
<Seat> <Water>
("Toilet seat
2
repeatedly until the temperature level
"Medium" "High"
Lit Lit
21