Other Settings; Power Plug - Toto WASHLET SW3084T40 Instruction Manual

Various Operations
Set whether or not to make a beep sound
*1
Beep sound
1
Press "Stopping" button until all LEDs
on the remote control start fl ashing.
(about 10 seconds)
2
Press "Rear cleansing" button.
The setting changes each time
the button is pressed once
Set whether or not to make a beep sound
For making a beep sound
One short beep.
For not making a beep sound
One long beep.
3
*1 When you change each of the settings, set the electronic sound to "Make a beep sound".
30

Other settings

Other settings
Set whether or not to use the personal setting
lock
Personal setting lock
2
Press "Personal setting lock 2"
button for 5 seconds or longer.
The setting changes each time
the button is held down
longer than 5 seconds.
Set whether or not to use the personal
setting lock
• Check by "Wand position adjustment" LED (Page 27)
For setting to "ON"
For setting to "OFF"
Press "Stopping" button.
<Settings complete>
Maintenance

Power Plug

(Approximately once a month)
Dry cloth Wet cloth
Unplug the power plug and
1
wipe it with a dry cloth.
Insert the power plug.
2
 The "Power" LED lights up.
WARNING
● Periodically remove dust from
the blades and other parts of the
power plug.
 •
Unplug the power plug and wipe it
with a dry cloth.
● Fully insert the power plug.
● When unplug the power plug, hold
the main body of the power plug.
 •
Pulling the power cord may
damage the power plug or power
cord.
Power Plug
WARNING
Always unplug the power plug from
the outlet before maintenance or
inspection.
(Failure to do so may cause electric shock
or malfunction, resulting in a breakdown.)
For safety, unplug the power
*1
plug before maintenance.
The "Power"
LED goes off .
Lit OFF
Main Unit
Do not use a dry cloth
or toilet paper on plastic
parts.
(May cause damage.)
*1 Except when using "Wand cleaning".
31