Gap Between The Main Unit And Bowl Unit - Toto WASHLET SW3084T40 Instruction Manual

Maintenance
[SW3084T40]

Gap between the Main Unit and Bowl Unit

You can remove the main unit to clean the top
of the bowl unit and the bottom of the main unit.
1
Unplug the power plug.
Remove the main unit.
2
• Do not pull the unit with undue force. (because the water supply hose and power cord are attached.)
(1) Pull the main unit toward you while pressing
the "Main unit removal button".
Water supply hose Top of the bowl unit
Power cord
Main unit
removal button
3
Clean the top of the bowl unit and the bottom of the main unit.
• Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft cloth
soaked in water so that no detergent remains.
Mount the main unit.
4
(1) Lift the main unit, then lower it straight down while threading the power
cord and water supply hose into the recess on the bowl unit.
• Be careful not to pinch the power cord.
• Do not excessively bend the water supply hose
(2) Align the main unit with the center of the base plate and press it
fi rmly onto the base plate until a click sound is heard.
CAUTION
Push the main unit fi rmly on to the base plate until a
click sound is heard.
(Doing so may cause the main unit to come loose and fall,
resulting in injury.)
After mounting, check that the main unit does not
detach even when pulled.
5 Insert the power plug.
• The "Power" LED lights up.
34
Gap between the Main Unit and Bowl Unit
(Approximately once a month)
Soft cloth soaked Toilet paper, etc.
in water (May cause damage.)
If the power is not unplugged,
the product may malfunction or
cause a failure or electric shock.
(2) Lift up the main unit.
• Do not excessively bend the water supply hose.
Base plate
Bolt
Base plate
Gap between the Main Unit and Bowl Unit
[SW3084]
Gap between the Main Unit and Bowl Unit
You can remove the main unit to clean the top
of the bowl unit and the bottom of the main unit.
1
Unplug the power plug.
Remove the main unit.
2
• Do not pull the unit with undue force.
(because the water supply hose and
power cord are attached.)
Clean the top of the bowl unit and the bottom of the main unit.
3
• Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft
cloth soaked in water so that no detergent remains.
4
Mount the main unit.
Click
Align the main unit with the center of the
base plate and press it fi rmly onto the base
plate until a click sound is heard.
Insert the power plug.
5
• The "Power" LED lights up.
(Approximately once a month)
Soft cloth soaked Toilet paper, etc.
in water (May cause damage.)
If the power is not unplugged,
the product may malfunction or
cause a failure or electric shock.
Water supply hose Top of the bowl unit
Base plate
Power cord
Bolt
Pull the main unit toward you while
pressing the "Main unit removal button".
CAUTION
Click
Push the main unit fi rmly on to the
base plate until a click sound is heard.
(Doing so may cause the main unit to come
loose and fall, resulting in injury.)
After mounting, check that the main
unit does not detach even when pulled.
Main unit
removal button
35