Deodorizing Filter; Wand; Water Filter Drain Valve - Toto WASHLET SW3084T40 Instruction Manual

Hide thumbs Also See for WASHLET SW3084T40:
Table of Contents

Advertisement

Maintenance

Deodorizing Filter

(Approximately once a month)
1
Unplug the power plug.
Remove the deodorizing
2
fi lter.
• Hold the knob and pull outward.
• Do not pull with undue force.
(May cause damage or malfunction.)
Clean with a tool such as a
3
toothbrush.
• When washing with water, dry off all
water before mounting.
4
Mount the deodorizing
fi lter.
Insert the power plug.
5
• The "Power" LED lights up.

Wand

<If you notice dirt (Wand cleaning)>
Extend the wand.
1
To operate from the back of remote control
Press "Wand cleaning" button.
To operate from the front of remote control
Recommended if the remote control is secured
to prevent theft.
(1)
Press "Stopping" button until all LEDs
on the remote control start fl ashing. (about
10 seconds)
(2)
Press "Front cleansing" button about
3 seconds or longer.
• The wand extends and water fl ows out for
cleaning.
• The wand automatically retracts after about
5 minutes.
36
Deodorizing Filter
Deodorizing Filter
Deodorizing Filter
Knob
Toothbrush, etc.
Push fi rmly until a
click sound is heard.

Water Filter Drain Valve

(Approximately once a month)
Soft cloth
Toilet paper, etc.
(May cause damage.)
Wipe with a soft, wet cloth.
2
• Do not pull, push or press the wand with
excessive force.
(May cause damage or malfunction.)
Press "Stopping" button on the
3
front side of the remote control.
• The wand retracts.
Wand
Water Filter Drain Valve
Water Filter Drain Valve
1
Close the shutoff valve.
• The water supply stops.
Do not remove the water fi lter drain valve while
the shutoff valve is open.
(Otherwise, water may leak out)
Extend the wand.
2
To operate from the back of remote control
(1)
(2)
Press "Stopping" button on the front side of the remote control.
• The wand retracts.
To operate from the front of remote control
Wand
Recommended if the remote control is secured to prevent theft.
(1)
Press "Stopping" button until all LEDs on the remote
control start fl ashing. (about 10 seconds)
(2)
Press "Front cleansing" button about 3 seconds or longer.
(3)
Press "Stopping" button on the front side of the remote control.
• The wand retracts.
3
Unplug the power plug.
Remove the cover and water fi lter
4
drain valve.
• Loosen the water fi lter drain valve with a fl at-head
screwdriver and then pull it.
Clean with a tool such as a toothbrush.
5
• Also, remove any dust from inside the hole of the
water fi lter drain valve.
Reinstall the water fi lter drain valve
6
and cover.
• Insert the water fi lter drain valve and use a fl at-head
screwdriver to tighten it securely.
7
Insert the power plug.
• The "Power" LED lights up.
8
Open the shutoff valve.
(Approximately once every 6 months)
<If you think the water pressure has weakened>
CAUTION
(Release the pressure from the water supply pipe.)
Press "Wand cleaning" button.
(Page 15)
Shutoff
valve
Water fi lter drain
valve
Cover
Flat-head screwdriver
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Washlet sw3084

Table of Contents