WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electric shock.
CAUTION
• Use caution when handling sheet
metal parts while servicing the
range.
- Some parts may have sharp edges, which
could result in injury.
1. Turn off the electrical supply going to the range.
2. Open the oven door and remove the racks from
inside the oven.
3. Remove the 10 screws from the back cover and
remove the back cover.
COMPONENT ACCESS
REMOvING THE BROIL ELEMENT
4. Unplug 2 terminals at each point
5. To remove the broil element:
a) Remove the 4 screws from the front and rear
brackets.
2 Front bracket screws
2 Rear bracket screws
b) Pull the element forward.
3-8
2 Terminals