LG LDE4413ST Service Manual page 16

Use to turn on the surface elements. An infinite
choice of heat settings is available from LOW to
HIGH The knobs can be set on or between any of
settings.
To turn on a Single element:
1. Push the Single element knob in.
2. Turn the knob in either direction to the
desired setting.
The control knob clicks when it is positioned
at both Off and Hi.
Off
Note:
• Hi is the highest temperature available.
• Lo is the lowest temperature available.
USING YOUR RANGE
Single
On
To turn on the Dual element:
There is one dual element located in the left front
position. Use the dual element as a dual or single
element.
1. Push in the appropriate knob.
2-A. Turn the knob counterclockwise to use it
as a Single element.
2-B. Turn the knob clockwise to use it as a
Dual unit.
Heating with inner
(smaller) element only
A
2-7
Heating with both
elements together
B