Troubleshooting Table; Problems With Operation - Hanseatic HGTI6082C13K7709DS User Manual

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean
there is a defect in the appliance. For this reason, please check the tables to see if you
can correct the malfunction.
WARNING!
Risk of electric shock in case of improp-
er repair!
Conducting improper repairs to the
dishwasher puts the person carrying
out the repairs and the user in danger.
■ Only authorised specialists may re-
pair the dishwasher. If in doubt,
contact our service department
(see page EN-38).
■ Only carry out the actions which are
described in this user manual.
■ Never repair defective dishwashers
– or dishwashers which you presume
to be defective – yourself. You can en-
danger yourself and subsequent users.

Problems with operation

Problem Possible cause
The dishwasher The mains plug has not
cannot be switched been inserted into a socket.
on.
There is no voltage being
supplied through the socket.
The selected dish- The dishwasher's door is
washing not closed properly.
programme will not
The water tap is not on
start or it stops.
properly.
The inlet hose is defective.
There is a risk of overflow-
ing. The electrical water stop
system has been activated.
Troubleshooting table
NOTICE
Risk of damage!
Improper handling of the dishwasher
can lead to property damage and to
damage to the dishwasher.
■ If water overfl ows, switch off the wa-
ter supply immediately and then con-
tact the service team (see page EN-38).
■ If the water has overfl owed, remove
any water standing in the dishwasher
before restarting a dishwashing pro-
gramme.
Solution
Insert the mains plug into the socket.
Check the fuse. Check the socket by
connecting another device.
Close the dishwasher door.
Turn the water tap on completely.
Contact our Service Centre
(see page EN-38).
Page EN-35