The Dishwashing Results Are Not Satisfactory - Hanseatic HGTI6082C13K7709DS User Manual

The dishwashing results are not satisfactory

Problem Possible cause
There are residues The rinse aid is incorrectly
or streaks on the dosed.
dishes.
There is no dishwasher salt.
The dishwasher salt is clumpy. Stir the dishwasher salt using the end of a
The dishes are not There are food scraps which
completely clean. are encrusted onto the dishes.
The dishes have not been
stacked optimally.
You have selected the incor-
rect dishwashing programme.
The dishwasher detergent is
incorrectly dosed.
The water pressure is too low.
The spraying arm can not ro-
tate unhindered.
The nozzles on the spraying
arm are blocked/calcified.
Only one spraying arm is active. See „Selecting a spraying arm(s)" on page
Troubleshooting table
Solution
Adjust the dosage (see „Changing the rinse aid
dose" on page EN-15).
Add dishwasher salt (see „Adding dishwasher
salt" on page EN-16).
spoon or similar.
Soak dirty dishes prior to washing the dishes.
Stack the dishes in such a way that all parts
can be reached by the water jets
(see „Loading the dishwasher" on page EN-17).
Select the correct dishwashing programme
(see „Programme table" on page EN-21).
Use the correct dosage of dishwasher detergent
(see „Programme table" on page EN-21).
Turn the water tap on completely.
Ensure that no dishes are impeding the motion
of the spraying arm.
Clean the nozzles (see „Checking and cleaning
the spraying arms" on page EN-27).
EN-23.
Page EN-37