Setting Up E-Mail Alerts - Dell 3330dn User Manual

To increase or decrease the number of minutes before the printer enters Power Saver mode, do one of the following:
Using the Embedded Web Server
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2
Click Settings, and then click General Settings.
3
Click Timeouts.
4
In the Power Saver box, increase or decrease the number of minutes you want the printer to wait before it enters
Power Saver mode.
5
Click Submit.
Using the printer control panel
1
Make sure the printer is on and Ready appears.
2
Press .
3
Press the arrow buttons until
4
Press the arrow buttons until
5
Press the arrow buttons until
6
Press the arrow buttons until
7
Press the arrow buttons to increase or decrease the number of minutes before the printer enters Power Saver
mode, and then press

Setting up e-mail alerts

You can have the printer send you an e-mail when the supplies are getting low or when the paper needs to be
changed, added, or unjammed.
To set up e-mail alerts:
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2
Click Settings.
3
Under Other Settings, click E-mail Alert Setup.
4
Select the items for notification, and type in the e-mail addresses.
5
Click Submit.
Note: See your system support person to set up the e-mail server.
Settings appears, and then press
General Settings appears, and then press
Timeouts appears, and then press
Power Saver appears, and then press
.
Administrative support
.
.
.
135
.