Conserving Supplies; Checking The Status Of Supplies From A Network Computer; Ordering Supplies; Printer Attached To A Network - Dell 3330dn User Manual

Conserving supplies

Conserving supplies using the printer control panel
There are some settings you can change from the printer control panel that will help you conserve toner and paper.
For more information, see the following table:
Supply
Toner
Paper or specialty media
Conserving supplies using the printer software
If you are printing a multiple-copy job, you can conserve paper or specialty media by sending a Verify print job. A
Verify print job lets you examine the first copy of a multiple-copy job to make sure it is satisfactory before you print
the other copies. If the job is unsatisfactory, you can cancel the job. If the job is satisfactory, you can select to print
the rest of the copies. For more information, see "Printing confidential and other held jobs" on page 58.
Checking the status of supplies from a network
computer
Note: The computer must be connected to the same network as the printer.
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in
the TCP/IP section.
2
Click Device Status. The Device Status page appears, displaying a summary of supply levels.

Ordering supplies

Printer attached to a network

1
Type your printer IP address in your Web browser to launch the Dell Configuration Web Tool.
2
Click www.dell.com/supplies.
Path to menu item
Settings  Quality Menu 
Toner Darkness
Settings  Finishing Menu 
N-up
Settings  Finishing Menu 
Sides (Duplex)
Maintaining the printer
126
Purpose of menu item
Lets you adjust the level of toner
released on a sheet of paper or specialty
media. The values range from 1 (lightest
setting) to 10 (darkest setting) with 8
being the factory default setting.
Lets you select to print two or more
page images on one side of a sheet.
Values for N-up are 2-Up, 3-Up, 4-Up, 6-
Up, 9-Up, 12-Up, and 16-Up.
Lets you print on both sides of a sheet
of paper