Table of Contents
Advertisement
Wait for the message to clear.
Waiting, too many events ... DO NOT POWER OFF
The printer received too much information. This message appears while it sorts or processes all the information it
received. Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer off while Waiting, too many events ... DO NOT
POWER OFF appears on the display.
30.yy Invalid refill, change cartridge
An unsupported, refilled toner cartridge is installed. Remove the toner cartridge, and then install a new one.
31.yy Replace defective or missing cartridge
The toner cartridge is either missing or not functioning properly.
Try one or more of the following:
•
Remove the toner cartridge, and then reinstall it.
•
Remove the toner cartridge, and then install a new one.
32.yy Cartridge part number unsupported by device
Remove the toner cartridge, and then install a supported one.
34 Short paper
Try one or more of the following:
•
Load the appropriate paper in the tray.
•
Press the down arrow button until
job using a different paper tray.
•
Check tray length and width guides and make sure the paper is properly loaded in the tray.
•
For Windows users, check the Print Properties settings to make sure the print job is requesting the correct paper
size and type.
For Macintosh users, check the Print dialog settings to make sure the print job is requesting the correct paper
size and type.
•
Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the
paper is large enough for the data being printed.
•
Cancel the current print job.
35 Insufficient memory to support Resource Save feature
The printer lacks sufficient memory to save settings. Install additional memory, or press
and continue printing.
Continue appears, and then press
Understanding printer messages
118
to clear the message and print the
to disable Resource Save
Hide quick links:
Advertisement
Table of Contents
