Graco Husky 2200 Repair Parts page 9

Problem
Problem Problem
Air bubbles in fluid.
Exhaust air contains fluid being
pumped.
Moisture in exhaust air.
Pump exhausts excessive air at
stall.
Pump leaks air externally.
Pump leaks fluid externally from
joints.
3A2714H
Cause
Cause Cause
Suction line is loose.
Diaphragm (or backup) ruptured.
Loose manifolds, damaged seats or
o-rings.
Pump cavitation.
Loose diaphragm shaft bolt.
Diaphragm (or backup) ruptured.
Loose diaphragm shaft bolt.
High inlet air humidity.
Worn air valve cup or plate.
Damaged air valve gasket.
Damaged pilot valve.
Worn shaft seals or bearings.
Air valve or fluid cover screws loose. Tighten.
Diaphragm damaged.
Air valve gasket damaged.
Loose manifold screws or fluid cover
screws.
Manifold o-rings worn out.
Troubleshooting
Solution
Solution Solution
Tighten.
Replace.
Tighten manifold bolts or replace
seats or o-rings.
Reduce pump speed or suction lift.
Tighten.
Replace.
Tighten or replace.
Use drier air supply.
Replace cup and plate.
Replace gasket.
Replace pilot valves.
Replace shaft seals or bearings.
Replace diaphragm.
Replace gasket.
Tighten manifold screws or fluid
cover screws.
Replace o-rings. Alternate
materials are available. See
Manifold Seals, page 30.
9