Graco Husky 2200 Repair Parts page 16

Repair
SP and and FK FK Models Models
SP SP and FK Models
PT Models PT PT Models Models
16
PO Models Models
PO PO Models
Rounded side faces diaphragm
Apply lithium based grease.
Apply primer and medium-strength (blue) thread
locker. Torque to 100-105 ft-lb (136–142 N•m).
AIR SIDE markings on diaphragm must face
center housing.
If screw comes loose or is replaced, apply
permanent (red) thread locker to diaphragm side
threads. Apply primer and medium-strength (blue)
thread locker to shaft side threads.
Lips must face out of housing.
Cartridges (109) must be installed before pilot
valves (111).
Torque to 20-25 in.-lb (2-3 N•m).
3A2714H