NOTICE:
To prevent damage to the connector, do not use tools to spread the securing clips.
4 If a WLAN card is not already installed, go to step 5. If you are replacing a WLAN card, remove the
existing card:
Disconnect the WLAN card from any attached cables.
a
Use your fingertips to carefully spread apart the metal securing tabs until the card pops up slightly.
b
Slide and lift the WLAN card out of its connector.
c
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and
realign the card.
NOTE:
Do not insert a Mobile Broadband card into the WLAN card slot.
NOTE:
The WLAN card may have two or three connectors, depending on the type of card you ordered.
1 WLAN card
5 To install a WLAN card:
Move any antenna cables out of the way to make space for the WLAN card.
a
2
2 metal securing tabs (2)
1
Adding and Replacing Parts
123