Safety Procedures - probst ASZ Operating Instructions Manual

Maintenance and care
7.4

Safety procedures

•
It is the contractor's responsibility to ensure that the device is checked by an expert in periods of
max. 1 year and all recognized errors are removed (→ see BGR 500).
•
The corresponding legal regulations and the regulations of the declaration of conformity have to be
observed!
•
We recommend that after checking the device, the badge "Safety checked" is put on the device.
(Order-No.: 2904.0056+inspection sticker with date).
•
You can receive these badges from us.
The check by an expert must be proved!
Device Year
5310.0259-005
Date
V3
Expert
17 / 18
Company
GB