Advertisement
10
Add End Caps and Cable Management Covers
i. After screen cables are connected and routed down the back of the columns (item B1),
partially clip on the cable management covers (item B3), this allows easy removal if
more cables need adding. Once satisfied all cables are fitted, clip the covers on fully.
ii. Fit end caps (items B2 & D2) to the columns and mounting rails (items B1 & D1).
iii. With a knife, cut to length the plastic slot inserts (item B4) and insert to the
front and sides of the columns (item B1).
PLASTIC INSERTS
i.
ii.
iii.
B1
B4
B4
CABLE
B3
B1
B2
D2
D1
D2
D1
B4
23
Advertisement
